Asus K7V User Manual page 21

3. HARDWARE SETUP
External Frequency Table
CPU PCI
(MHz) (MHz)
100.00 33.33
103.00 34.33
105.00 35
110.00 36.67
NOTE: For updated processor settings, visit the ASUS web site (see ASUS CON-
TACT INFORMATION).
WARNING!
Premature wearing of the processor may result when overclocking.
Be sure that the DIMM you use can handle the specified SDRAM MHz or else
bootup will not be possible.
6) Voltage Regulator Output Setting (VID1, VID2, VID3)
This jumpers allow you to manually adjust the CPU core voltage. It is recom-
mended to use CPU Default as the CPU core voltage. CPU Default means the
Vcore is generated according to the CPU VID configuration. For each jumper
setting, there are two voltage options, depending on the CPU used.
1 0 1 0 1 0
K7V
®
K7V CPU Core Voltage
Selection
Frequency Selection Switches
1 2
[ O N ] [ O N ]
[ O N ] [ O N ]
[OFF] [OFF]
[OFF] [OFF]
1 2 3
VID3
VID2
VID1
2/2.05Volts
1 2 3
VID3
VID2
VID1
1.7/1.75Volts
1 2 3
VID3
VID2
VID1
1.4/1.45Volts
ASUS K7V User's Manual
3
[OFF]
[ O N ]
[OFF]
[OFF]
4 1 2 3 4 1 2 3 4
1.9/1.95Volts 1.8/1.85Volts
4 1 2 3 4 1 2 3 4
1.6/1.65Volts 1.5/1.55Volts
4 1 2 3 4 1 2 3 4
1.3/1.35olts CPU Default/
JumperFree
(Default)
4
[OFF]
[ O N ]
[OFF]
[ O N ]
21