Asus K7V User Manual page 19

3. HARDWARE SETUP
3) Onboard Audio Setting (available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using an PCI audio card on any
of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in
this section). If using an PCI audio expansion card, Onboard AC'97 Audio Con-
troller in 4.4.5 Peripheral Setup must also be disabled.
Setting AUDIO CODEC
Enable [1-2] [1-2] [1-2] [1-2] (default)
Disable [2-3] [2-3] [2-3] [2-3]
1 0 1 0 1 0
K7V
®
K7V Audio Codec Setting
4) I/O Voltage Setting (VIO)
VIO allows you to select the voltage supplied to the DRAM, chipset, AGP, PCI,
and the CPU's I/O buffer. The default voltage (3.31V) should be used unless
processor overclocking requires a higher voltage.
1 0 1 0 1 0
K7V
®
K7V VIO Setting
WARNING!
Using a higher voltage may help when overclocking but may re-
sult in the shortening of your computer component's life. It is strongly recom-
mended that you leave this setting on its default.
Enable
Onboard
Audio Codec
(Default)
2
1
1 2
3.30 Volt
ASUS K7V User's Manual
Disable
Onboard
Audio Codec
3
2
VIO
3 4
2 3
3.56 Volt
3.40 Volt
19