Table of Contents
Advertisement
The following items appear only when you set the Ai.Overclocking.item to
[Manual].
OC.From.CPU.Level.Up.[Auto]
After you select a CPU level, the CPU.Frequency(MHz), Vcore.Voltage.Offset,
and Memory.Voltage items will be adjusted accordingly.
Configuration options: [Auto] [Athlon64 3800+] [Athlon64 4000+]
CPU.Frequency(MHz).[220.0]
Allows you to select the target CPU frequency. Use the <+> and <-> keys to adjust
the PCIE frequency. Frequencies higher than CPU manufacturer recommends are
not guaranteed to be stable. If the system becomes unstable, return to the default
setting.
Configuration options: [200.0] [201.0] ~ [299.0] [300.0]
PCI-Express.Frequency(MHz).[100]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust
the PCIE frequency. The values range from 100 to 150.
The following item appears only when you set the Ai.Overclocking.item to
[Overclock Profile].
Overclock.Options.[Auto]
Allows you to select from existing overclocking profiles for overall system
overclocking.
Configuration options: [Auto] [Overclock 3%] [Overclock 5%] [Overclock 7%]
2.4.3.
Processor.Frequency.Multiplier.[Auto]
Allows configuration of the processor frequency. Depending on the CPU model you
install, this item may not be configurable.
Configuration options: [Auto] [x5.0 1000 MHz] [x5.5 1100MHz] [x6.0 1200 MHz]
[x6.5 1300 MHz] [x7.0 1400 MHz] [x7.5 1500 MHz] [x8.0 1600 MHz] [x8.5 1700
MHz] [x9.0 1800 MHz] [x9.5 1900 MHz] [x10.0 2000 MHz] [x10.5 2100 MHz] [x11.0
2200 MHz]
2.4.4.
K8(CPU).to.SB.Freq.Auto.[Disabled]
Enables or disables the CPU to automatically adjust Hyper Transport frequency.
When enabled, the system will automatically adjust the frequency according to
CPU capability.
Configuration options: [Enabled] [Disabled]
2-22
Chapter 2: BIOS setup
Advertisement
Table of Contents
