Table of Contents
Advertisement
9..
Serial.port.connectors.(10-1.pin.COM1)
The connector is for a serial (COM) port. Connect the serial port module
cable to the connector, then install the module to a slot opening at the back of
the system chassis.
The serial port bracket (COM1) is purchased separately.
®
G-SURF365.COM.port.connector
10.. Front.panel.audio.connector.(10-1.pin.AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either High Definition Audio or AC`97 audio standard. Connect one
end of the front panel audio I/O module cable to this connector.
®
G-SURF365.Analog.front.panel.connector
•
•
1-32
G-SURF365
G-SURF365
We recommend that you connect a high-definition front panel audio module
to this connector to avail of the motherboard high-definition audio capability.
If you want to connect a high-definition front panel audio module to this
connector, make sure that the Front.Panel.Select item in the BIOS is set
to [HD Audio]; if you want to connect an
this connector, set the item to [AC97]. See page 2-29 for details.
COM1
PIN 1
AAFP
HD.Audio-compliant
pin.definition
AC`97
Chapter 1: Product introduction
Legacy.AC. 97.audio
pin.definition
front panel audio module to
Advertisement
Table of Contents
