Biostar TF560 A2 Setup Manual page 20

Motherboard Manual
JATXPWR3: Auxiliary Power for Graphics
This connector is an auxiliary power connection for graphics cards. Exclusive
power for the graphics card provides better graphics performance.
On-Board LED Indicators
There are 2 LED indicators on the motherboard to show system status.
LED_D1 and LED_D2:
These 2 LED indicate system power on diagnostics.
Please refer to the table below for different messages:
LED_D1 LED_D2
ON
ON OFF
OFF
OFF OFF
18
LED_D1
LED_D2
Message
ON Normal
Memory Error
ON VGA Error
Abnormal: CPU / Chipset error.
Pin Assignment
1 +12V
1
2 Ground
3 Ground
4 VCC
4