Asus CUWE-RM User Manual page 18

3. HARDWARE SETUP
1) JumperFree™ Mode Setting (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
NOTE: Set all dip switches (DSW) to OFF for JumperFree™ mode.
Setting
Disable (Jumper)
Enable (JumperFree) [2-3]
CUWE-RM
®
CUWE-RM JumperFree™ Mode Setting
2) I/O Voltage Setting (VIO)
This jumper allows you to select the voltage supplied to the DRAM, chipset,
PCI, and the CPU's I/O buffer. The default voltage should be used unless pro-
cessor overclocking requires a higher voltage.
Setting
Normal
3.66V
CUWE-RM
®
CUWE-RM I/O Voltage Setting
WARNING!
Using a higher voltage may help when overclocking but may result
in the shortening of your computer component's life. It is strongly recommended
that you leave this setting on its default.
18
JEN
[1-2] (default)
VIO
[1-2] (default)
[2-3]
ASUS CUWE-RM User's Manual
DSW
ON
1 2 3 4 5
1 2 3 1 2 3
Jumper JumperFree
Mode Mode
JEN
VIO
1 2 3 1 2 3
Normal 3.66 Volt
(Default)
OFF