Asus CUSL2-C BP User Manual page 20

3. HARDWARE SETUP
Motherboard Feature Settings
The motherboard's onboard functions are either adjusted through jumpers or DIP
switches. When using DIP switches, the white block represents the switch's posi-
tion. The example below shows all the switches in the OFF position.
CUSL2-C BP
CUSL2-C BP DIP Switches
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches must be set to OFF.
Setting
Disable (Jumper)
Enable (JumperFree) [2-3] (default)
CUSL2-C BP
CUSL2-C BP JumperFree™
Mode Setting
20 ASUS CUSL2-C Black Pearl User's Manual
®
JEN
[1-2]
®
DSW
ON OFF
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
DSW
OFF
JEN
Disable Enable(default)
1 2 2 3