Asus Crosshair V Formula ThunderBolt User Manual page 93

CPU.Voltage.Over-Current.Protection.[Auto]
This item provides wider total power range for overclocking. A higher value
brings a wider total power range and extends the overclocking frequency range
simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%] [Disabled]
Do not remove the thermal module while changing the DIGI+ VRM related
parrameters . The thermal conditions should be monitored.
Some of the following items are adjusted by typing the desired values using
the numeric keypad and press the <Enter> key. You can also use the <+> and
<-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
CPU/NB.Over-Current.Protection.[Auto]
This item provides wider total power range for overclocking. A higher value
brings a wider total power range and extends the overclocking frequency range
simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%]
CPU.PWM.Phase.Control.[Extreme]
Phase number is the number of woorking VRM phase. Increasing phase number
under heavy system loading to get more transient and better thermal performance.
Reducing phase number under light system loading to increase VRM efficiency
[Standard]
[Optimized]
[Extreme]
[Manual Adjustment] Allows manual adjustment
VRM.Over.Temperature.Protection.[Enabled]
CPU.Voltage.Frequency.[Auto]
Allows you to select the CPU Voltage Frequency.
Configuration options: [Auto] [Manual]
VRM Fixed Frequency Mode [300]
This item appears only when you set the CPU Voltage Frequency item to
[Manual] and allows you to set a fixed VRM frequency. Use the <+> and <->
keys to adjust the value. The values range from 300k Hz to 500k Hz with a
10k Hz interval.
CPU.PWM.mode.[Extreme]
[T.Probe] Maintains the VRM thermal balance.
[Extreme] Maintains the VRM current balance.
ROG Crosshair V Formula
Proceeds phase control depending on the CPU loading.
Loads the ASUS optimized phase tuning profile.
Proceeds the full phase mode.
3-9