Asus CUA User Manual page 62

4. BIOS SETUP
SDRAM Command Timing [2T]
Leave on default setting. Configuration options: [1T] [2T]
SDRAM Multi-Banking [On]
Leave on default setting. Configuration options: [On] [Off]
SDRAM DataIn-Precharge Latency [1T]
Leave on default setting. Configuration options: [2T] [1T]
Onboard VGA [Enabled]
Leave on default setting if you want to use the onboard VGA. Configuration
options: [Disabled] [Enabled]
Graphics Window Size [64MB]
This feature allows you to select the size of mapped memory for AGP graphic
data. Configuration options: [Disabled] [1MB] [2MB] [4MB] [8MB] [16MB]
[32MB] [64MB] [128MB] [256MB]
Memory Hole At 15M-16M [Disabled]
This field allows you to reserve an address space for ISA expansion cards
that require it. Setting the address space to a particular setting will make
that memory space unavailable to the system. Expansion cards can only
access memory up to 16MB. Configuration options: [Disabled] [Enabled]
Host Memory Write Buffer [1 Line]
Leave on default setting. Configuration options: [4 Lines] [1 Line]
PCI 2.2 Support [Disabled]
This function allows you to enable or disable PCI 2.2 features. Configura-
tion options: [Disabled] [Enabled]
Passive Release Support [Disabled]
Passive release allows the PCI bus to carry out other tasks when it is receiv-
ing data from ISA devices. Configuration options: [Disabled] [Enabled]
Super I/O Recovery Time [0.75 us]
Leave on default setting. Configuration options: [0.25 us]...[3.75 us]
Onboard PCI IDE Enable [Both]
You can select to enable the primary IDE channel, secondary IDE channel,
both, or disable both channels. Configuration options: [Both] [Primary] [Sec-
ondary] [Disabled]
62 ASUS CUA User's Manual