Advanced Bios Features - Gigabyte GA-790XTA-UD4 User Manual

2-5

Advanced BIOS Features

AMD C1E Support
Virtualization
AMD K8 Cool&Quiet control
 Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Full Screen LOGO Show
Backup BIOS Image to HDD
Init Display First
higf : Move Enter: Select
F5: Previous Values
AMD C1E Support
Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the CPU
core frequency and voltage will be reduced during system halt state to decrease power consumption.
(Default: Disabled)
Virtualization
Virtualization allows a platform to run multiple operating systems and applications in independent parti-
tions. With virtualization, one computer system can function as multiple virtual systems.
(Default: Disabled)
AMD K8 Cool&Quiet control
Auto
Disabled
Hard Disk Boot Priority
Specifies the sequence of loading the operating system from the installed hard drives. Use the up or
down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or
<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.
First/Second/Third Boot Device
Specifies the boot order from the available devices. Use the up or down arrow key to select a device
and press <Enter> to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP,
USB-CDROM, USB-HDD, Legacy LAN, Disabled.
Password Check
Specifies whether a password is required every time the system boots, or only when you enter BIOS
Setup. After configuring this item, set the password(s) under the Set Supervisor/User Password item in
the BIOS Main Menu.
Setup
System
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced BIOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to
reduce heat output from your computer and its power consumption. (Default)
Disables this function.
A password is only required for entering the BIOS Setup program. (Default)
A password is required for booting the system and for entering the BIOS Setup
program.
[Disabled]
[Disabled]
[Auto]
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Setup]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[PCI Slot]
F10: Save
- 46 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults