Gigabyte GA-790XTA-UD4 User Manual page 43

DRAM Voltage Control
Allows you to set memory voltage.
Normal
1.275V ~ 2.445V
Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the
memory.
DDR VTT Voltage Control
Allows you to set the memory VTT voltage.
Normal
0.720V ~ 1.050V
Note: Increasing memory voltage may result in damage to the memory or reduce the useful life of the
memory.
NB Voltage Control
Allows you to set the North Bridge voltage.
Normal
0.920V ~ 1.400V
SB/HT Voltage Control
Allows you to set the South Bridge/HT-Link voltage.
Normal
0.940V ~ 1.500V
NB/PCIe/PLL Voltage Control
Allows you to set the North Bridge PCIe PLL voltage.
Normal
1.450V ~ 2.100V
CPU NB VID Control
Allows you to set the CPU North Bridge VID voltage. Auto sets the CPU North Bridge VID voltage as
required. The adjustable range is dependent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
CPU Voltage Control
Allows you to set the CPU voltage. Auto sets the CPU voltage as required. The adjustable range is de-
pendent on the CPU being installed. (Default: Normal)
Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU.
Normal CPU Vcore
Displays the normal operating voltage of your CPU.
Supplies the memory voltage as required. (Default)
The adjustable range is from 1.275V to 2.445V.
Supplies the memory VTT voltage as required. (Default)
The adjustable range is from 0.720V to 1.050V.
Supplies the North Bridge voltage as required. (Default)
The adjustable range is from 0.920V to 1.400V.
Supplies the South Bridge/HT-Link voltage as required. (Default)
The adjustable range is from 0.940V to 1.500V.
Supplies the North Bridge PCIe PLL voltage as required. (Default)
The adjustable range is from 1.450V to 2.100V.
- 43 - BIOS Setup