Integrated Peripherals - Gigabyte GA-790FXTA-UD5 User Manual

2-6

Integrated Peripherals

OnChip IDE Channel
OnChip SATA Type
x OnChip SATA Port4/5 Type
Onboard ESATA controller
Onboard ESATA Mode
Onboard SATA3 controller
Onboard SATA3 Mode
GSATA RAID Configuration
 Onboard LAN device
Onboard Audio Function
Onboard 1394 Function
Onboard USB 3.0 Controller
OnChip USB Controller
USB EHCI Controller
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
Onboard Serial Port 1
Onboard Parallel Port
higf : Move Enter: Select
higf : Move Enter: Select
F5: Previous Values
F5: Previous Values
Parallel Port Mode
x ECP Mode Use DMA
higf : Move Enter: Select
F5: Previous Values
OnChip IDE Channel
Enables or disables the integrated IDE controller. (Default: Enabled)
OnChip SATA Type (AMD SB750, SATA2_0~SATA2_3 connectors)
Configures the operating mode of the integrated SATA2_0~SATA2_3 controller.
Native IDE
RAID
AHCI
BIOS Setup
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F6: Fail-Safe Defaults
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
Enables RAID for the SATA controller.
Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
[Enabled]
[Native IDE]
IDE
[Enabled]
[AHCI]
[Enabled]
[IDE]
[Press Enter]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
F10: Save
F10: Save
[SPP]
3
F10: Save
- 50 -
Item Help
Menu Level 
ESC: Exit F1: General Help
ESC: Exit F1: General Help
F7: Optimized Defaults
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults