Product Specifications - Gigabyte GA-790FXTA-UD5 User Manual

1-2

Product Specifications

CPU
Hyper Transport Bus 
Chipset  North Bridge: AMD 790FX
 South Bridge: AMD SB750
Memory
Audio  Realtek ALC889 codec
 Support for S/PDIF In/Out

LAN

Expansion Slots 
Multi-Graphics
Technology
Storage Interface 
Hardware Installation
Support for AM3 processors:

AMD Phenom II processor/ AMD Athlon
™
(Go to GIGABYTE's website for the latest CPU support list.)
5200 MT/s
4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

Dual channel memory architecture

Support for DDR3 1866 (O.C.)

Support for ECC memory modules

(Go to GIGABYTE's website for the latest memory support list.)
 High Definition Audio
 2/4/5.1/7.1-channel
Support for Dolby

Support for CD In
2 x RTL8111D chips (10/100/1000 Mbit)

Support for Teaming

Support for Smart Dual LAN
2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
1 x PCI Express x16 slot, running at x8 (PCIEX8)

(The PCIEX16_1, PCIEX16_2, and PCIEX8 slots conform to PCI Express 2.0
standard.)
1 x PCI Express x1 slot

3 x PCI slots

Support for 2-Way/3-Way ATI CrossFireX

South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3,
SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
Marvell 9128 chip:

- 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to
2 SATA 6Gb/s devices
- Support for SATA RAID 0 and RAID 1
JMicron JMB362 chip:

- 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel sup-
porting up to 2 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, and JBOD
iTE IT8720 chip:

- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
(Note 2)
/1333/1066 MHz memory modules
(Note 3)
Home Theater
®
- 10 -
II processor
™
(Note 5)
technology
™
(Note 1)
(Note 4)