Hardware Monitor - Asus CROSSHAIR User Manual

Alarm Time (hh:mm) [ X: X: X]
To set the time of alarm:
1. Highlight this item and press <Enter> to display a pop-up menu for the hour
field.
2. Key-in a value (Min=0, Max=23), then press <Enter>.
3. Press <TAB> to move to the minutes field then press <Enter>.
4. Key-in a minute value (Min=0, Max=59), then press <Enter>.
Power Up By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power Up By PS/2 Keyboard [Disabled]
Allows you to disable the Power On by PS/2 keyboard function or set specific
keys on the PS/2 keyboard to turn on the system. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead. Configuration options:
[Disabled] [Space Bar] [Ctrl-ESC] [Power Key]
4.6.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values automatically
detected by the BIOS. It also allows you to change CPU Q-Fan feature-related
parameters. Select an item then press <Enter> to display the configuration options.
Voltage Monitor
Temperature Monitor
Fan Speed Monitor
Fan Speed Control
CPU Fan Connector Type
Fan Boost Function
CPU Fan Speed warning
F1:Help ↑↓ : Select Item
ESC: Exit →←: Select Menu
ASUS Crosshair
Phoenix-Award BIOS CMOS Setup Utility
Power
Hardware Monitor
[4-Pin Fan]
[Disabled]
[800 RPM]
-/+: Change Value
Enter: Select SubMenu
Select Menu
Item Specific Help
Press [Enter] to go to
the sub-menu.
F5: Setup Defaults
F10: Save and Exit
-