GA-4MXSV Motherboard
Boot -time Diagnostic
When this item is enabled, system will shows Diagnostic status when system boot.
Enabled
Disabled
Reset Configuration Data
Yes
No
NumLock
This option allows user to select power-on state for NumLock.
On
Off
Memory Processor Error
When Boot is selected, the system will attempt to boot after a memory or proocessor error
occured.
Boot
Halt
Multiprocessor Specification
This option allows user to configure the multiprocessor(MP) specification revision level. Some
operating system will require 1.1 for compatibility reasons.
1.4
1.1
Enable Boot-time Diagnostic.
(Default value)
Disable this function.
Reset all configuration data.
Do not make any changes. (Default value)
Enable NumLock.
Disable this function.
System attempts to boot if a memory or proocessor error cooured.
(Default value)
System will stop if an error is detected during power up.
Support MPS Version 1.4 . (Default value)
Support M PS Version 1.1.
4 6