Front Panel; Status Light Descriptions - NETGEAR WNDR3700v2 - N600 Wireless Dual Band Gigabit Router Setup Manual

Front Panel

1
Figure 2
The front panel has nine status lights that you can use to monitor and verify various conditions.
There are also two switch buttons on the right (or at the bottom if the router is in its stand). The
status lights are described in
Table 1.

Status Light Descriptions

Item Function Activity
Power/Test Solid Amber
1.
Solid Green
Blinking Green
Blinking Amber
Off
2. 2.4 GHz Off
Mode
Solid Green
Blinking Green
3. 5 GHz Off
Mode
Solid Blue
Blinking Blue
Getting to Know Your Wireless Router
2
3 4
5
Table 1, and the switch buttons in
Description
The unit is starting up after being powered on.
The unit startup has completed; the unit is ready.
Firmware is corrupted. See
page 27 for instructions on restoring your router firmware.
1. Firmware is upgrading.
2. Restore factory settings button pressed; restoring factory default
settings.
Power is not supplied to the router.
The 11n mode at 2.4 GHz is off.
The unit is operating in 11n mode at 2.4 GHz.
Data is being communicated over a wireless network.
The 11n mode at 5 GHz is off.
The unit is operating in 11n mode at 5 GHz.
Data is being communicated over the wireless network.
6
7
8
Table
"Checking Basic Router Functions" on
2.
3