Delete Array; Select Boot Array - Asus A7V600 SE User Manual

4. Select Start Create Process and press <Enter> to setup hard disk for RAID
system. The following confirmation message appears:
The same confirmation message appears when the Auto Setup for Capacity
option is selected.
Press "Y" to confirm or "N" to return to the configuration options.

3.4.4 Delete Array

1. In the VIA RAID BIOS utility main menu, select Delete Array then press the
<Enter> key. The focus is directed to the list of channel used for IDE RAID
arrays.
2. Press the <Enter> key to select a RAID array to delete. The following
confirmation message appears.
The selected array will be destroyed.
Are you sure? Continue? Press Y/N
Press "Y" to confirm or "N" to return to the configuration options.

3.4.5 Select Boot Array

1. In the VIA RAID BIOS utility main menu, select Select Boot Array then press
the <Enter> key. The focus is directed to the list of channel used for IDE RAID
arrays.
2. Press the <Enter> key to select a RAID array for boot. The Status of the
selected array will change to Boot. Press <ESC> key to go return to menu
items. Follow the same procedure to deselect the the boot array.
Channel
[ ]Serial_Ch0 Master
[ ]Serial_Ch1 Master
ASUS A7V600 SE Motherboard
The data on the selected disks will
be destroyed. Continue? Press Y/N
Drive Name
XXXXXXXXXX
XXXXXXXXXX
ESC : Exit
Array Name Mode Size(GB)
xxxxx xxx.xx
xxxxx xxx.xx
Status
Hdd
Hdd
3-13