Delete An Existing Raid Array - Asus Maximus IV Extreme User Manual

Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Topology
HBA 0: Marvell 0
├ Virtual Disks
│ └ VD 0: New_VD
│ ├ PD 0: ST3160812AS
│ └ PD 8: ST3160812AS
└ Free Physical Disks
Help
Marvell RAID on chip controller.
ENTER: Operation F10: Exit/Save ESC: Return
6. Press <F10>. The following warning message appears:
Exit
Do you want to exit from Marvell BIOS Setup?
Yes No
Press <Y> to save the RAID setting and exit the Marvell RAID utility.

Delete an existing RAID Array

Select the RAID array to delete and press <Enter>. Select Delete and press
1.
<Enter>.
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
Topology
HBA 0: Marvell 0
├ Virtual Disks
│ └ VD 0: New_VD
│ ├ PD 0: ST3160812AS
│ └ PD 8: ST3160812AS
└ Free Physical Disks
Help
Delete the selected virtual disk.
ENTER: Operation F10: Exit/Save ESC: Return
4-24
Information
Vendor ID : 1B4B
Device ID : 9130
Revision ID : B1
BIOS Version : 1.0.0.1028
Firmware Version: 2.2.0.1105
PCIe Speed Rate : 5.0Gbps
Configure SATA as:
▶
Information
ID : 0
Name : New_VD
Status : Functional
[Delete] Stripte Size : 64K
RAID Mode : RAID0
Size : 304128MB
BGA Status : N/A
Number of PDs : 2
Members : 0 8
▶
AHCI Mode
▶
▶
Chapter 4: Software support