Front Panel - NETGEAR WNDR3300v2 - N600 Wireless Dual Band Router Setup Manual

Front Panel

Figure 2
You can use the status lights on the front of the wireless router to verify various conditions.
Table 1. Status Light Descriptions
Item Function Activity
Power Solid Amber
1.
Solid Green
Blinking Green
Blinking Amber
Off
2.4 GHz Solid Green
2.
Mode
Blinking Green
Off
5 GHz Solid Blue
3.
Mode
Blinking Blue
Off
Getting to Know Your Wireless Router
N600 Wireless Dual Band Router WNDR3300v2 Setup Manual
Description
The unit is starting up after being powered on.
The unit startup has completed; the unit is ready.
Firmware is corrupted. See
page 31 for instructions on restoring your router firmware.
1. Firmware is upgrading.
2. Restore factory settings button pressed; restoring factory default
settings.
Power is not supplied to the router.
The unit is operating in 11n mode at 2.4 GHz.
Data is being communicated over a wireless network.
The 11n mode at 2.4 GHz is off.
The unit is operating in 11n mode at 5 GHz.
Data is being communicated over the wireless network.
The 11n mode at 5 GHz is off.
"Checking Basic Router Functions" on
3