Asus A7V266 User Manual page 21

3. HARDWARE SETUP
6) Voltage Regulator Output Setting (VID1, VID2, VID3, VID4)
This jumpers allow you to manually adjust the CPU core voltage. It is
recommended to use CPU Default as the CPU core voltage. CPU Default means
the Vcore is generated according to the CPU VID configuration. For each jumper
setting, there are two voltage options, depending on the CPU used.
1 0 1 0 1 0
A7V266
A7V266 CPU Core Voltage
Selection
7) Bass Center Setting (CENTER/BASS, BASS/CENTER)
Use these jumpers in conjunction with the C-Media PCI Audio Driver and to
adjust output for 4 or 6 speaker audio. No audio standard exists for the three
pick-up surfaces on male audio jacks, therefore it may be necessary to switch
jumpers from the default position, type 1, to type 2, in order to help reroute
signals among the internal leads in the Line-In, Line-Out, Mic female sockets.
Make sure a test is made using the C-Media Audio Driver software setup available
on the Support CD.
1 0 1 0 1 0
A7V266
A7V266 Bass Center
Setting
VID4
VID3
VID2
VID1
VID4
VID3
VID2
VID1
1 2
type 1 Bass
(CENTER/BASS)
(Default)
ASUS A7V266 User's Manual
1 2 3
1 2 3
1.8/1.775Volts
1.85/1.825Volts
1 2 3 1 2 3
1.75/1.725Volts 1.7/1.675Volts
BCS
2 3
type 2 Bass
(BASS/CENTER)
21