Asus A7V266 User Manual page 20

3. HARDWARE SETUP
4) CPU Type Frequency Setting (PALO_FREQ)
This jumper setting accomodates the difference between the internal frequency
between standard and new AMD CPUs. If changing from one type of CPU to
another, the jumper caps must be adjusted. The factory default setting, [2-3], is
for standard Athlon/Duron CPUs. The Palomino processor will only function
on this motherboard after the jumpers are adjusted to [1-2].
1 0 1 0
A7V266
A7V266 PALO_FREQ Setting
5) I/O Voltage Settings (JP1, JP2)
These jumpers allow you to select the voltage supplied to the DRAM, chipset,
AGP, and PCI. The default setting for the jumpers is: JP1 [2-3] and JP2 [1-2],
2.65 volts. Use the default setting for better system reliability.
1 0 1 0
A7V266
A7V266 Voltage Setting
20
PALO_FREQ
1 0
1 0
ASUS A7V266 User's Manual
1 2 3
FID0
FID0
FID1
FID1
FID2
FID2
FID3
FID3
PALOMINO ATHLON/DURON
(Default)
JP1/JP2
1 2 3 1 2 3 1 2 3
JP1
JP2
2.5V 2.65V 2.75V
(Default)
1 2 3
1 2 3
2.8V