NETGEAR WGT624v1 - 108 Mbps Wireless Firewall Router Reference Manual page 32

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624
When the router successfully detects an active Internet service, the router's Internet LED
c.
goes on. The Setup Smart Wizard reports which connection type it discovered, and
displays the appropriate configuration menu. If the Setup Smart Wizard finds no
connection, you will be prompted to check the physical connection between your router
and the cable or DSL line.
The Setup Smart Wizard will report the type of connection it finds. The options are:
d.
• Connections which require a login using protocols such as
PPPoE, PPTP, Telstra, or Bigpond broadband connections.
• Connections which use dynamic IP address assignment.
• Connections which use fixed IP address assignment.
The procedures for filling in the configuration menu for each type of connection follow
below.
When the router successfully detects an active Internet service, the router checks to see of
e.
there is a new version of firmware available. If so, you will be prompted to upgrade your
firmware. Take advantage of this opportunity to assure that your wireless router is up to
date with the latest enhancements and features.
If you choose not to use the auto-update feature, you can check for new firmware by
following the procedure in
Note: Be sure to check the NETGEAR web site for documentation updates which are
available at http://www.netgear.com/docs.
3-8
"Upgrading the Router Software" on page
M-10153-01
6-5.
Connecting the Router to the Internet