Pausing Or Restarting; Changing Cycles, Options And Modifiers; Status Lights - Whirlpool WFW9400SW - Duet HT Series Use And Care Manual

Liquid detergent:
A
Selector in position for liquid detergent
A. Detergent type selector
Powdered detergent:
A
Selector in position for powdered detergent
A. Detergent type selector
Chlorine bleach compartment
(Letter E in Dispenser Illustration)
Add no more than cup (160 mL) liquid chlorine bleach to this
compartment. The bleach will be automatically diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.
Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess. Follow the manufacturer's
directions for proper use.
Do not fill beyond the "MAX" level. Overfilling could cause
garment damage.
Fabric softener compartment
(Letter F in Dispenser Illustration)
Pour measured liquid fabric softener into the fabric softener
dispenser, if desired.
Do not overfill. The dispenser holds
The fabric softener is dispensed in the rinse cycle. If Extra
Rinse is selected, the fabric softener will be dispensed during
the Extra Rinse.
Do not use fabric softener dispensing balls in this washer.
Dispensing balls will not operate correctly with this washer.
Do not spill or drip any fabric softener onto the clothes.
At the end of the cycle, a small amount of water may be left in
the dispenser. This is normal.
NOTE: Use only liquid fabric softener in this dispenser.
1. To pause the washer at any time, press PAUSE/CANCEL.
2. To continue the cycle, press START (for approximately
Not all Options and Modifiers are available with all cycles.
Available modifiers will glow amber. If an option or modifier is
unavailable with a selected cycle, the light will not illuminate.
Cycles, Options and Modifiers can be changed anytime before
START is selected.
Options and Modifiers can be changed anytime after START is
selected and before the start of the selected Option or Modifier.
1. Press PAUSE/CANCEL twice.
2. Press POWER.
3. Select desired cycle.
4. Select the desired Options or modifiers such as Water Temp,
5. Press START (for approximately 1 second) to restart the
1. Press PAUSE/CANCEL twice.
2. The washer powers down, the door unlocks, and clothes can
NOTE: If the water level or the temperature is too high, the
washer will drain automatically before the door unlocks.
1. Press PAUSE/CANCEL once.
2. Select the desired Options or modifiers such as Water Temp,
3. Press START (for approximately 1 second) to continue the
1. Press PAUSE/CANCEL twice.
2. Press POWER.
3. Select DRAIN/SPIN.
cup (60 mL).
4. Press START (for approximately 1 second) to begin the drain.
5. When the spin is complete, the door unlocks. Items can be
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.

Pausing or Restarting

1 second).

Changing Cycles, Options and Modifiers

To cancel a cycle and select a new cycle
Spin Speed and Soil Level.
washer at the beginning of the new cycle.
To cancel a cycle
be removed.
To change Options or Modifiers after the cycle has
started
Spin Speed and Soil Level. Available selections will glow
amber.
cycle.
To drain the washer manually
removed from the washer.

Status Lights

13