Dual Bandpass Subwoofer System BP104 Installation & Owner's Manual page 5

Dual's patent-pending Illuminite bulb system and control circuitry provide for
extraordinary blue illumination, allowing for creative, color-coordinated
installations. The interior of your vehicle will never sound or look ordinary again!
Let your imagination take you there.
The lighting features of all Illuminite products require a 1V power source to
operate. The speaker has two distinct sets of input terminals. The first is labeled
"audio input" and the second is labeled "Illuminite lighting inputs". The inputs are
clearly marked with a label positioned directly above the terminal housing. The
polarity (+ and -) indicators for each set of inputs also appear on these labels.
1. Do not connect your amplifier or any audio source to the Illuminite inputs.
These inputs are designed for switched 1V DC power only. Do not connect
directly to your battery permanently, as it will cause your battery to discharge.
Please use a switched 1V source.
. See Fig. 1a, (illustrated wiring diagram) to be sure to maintain polarity. Be
sure to connect to a switched 1 volt source. Proper connection would be
the positive (+) 1V wire to the positive (+) Illuminite input terminal and the
negative (-) Illuminite input terminal to a solid chassis ground.
DO NOT CONNECT AMP OR ANY AUDIO SOURCE TO ILLUMINATION INPUTS.
DAMAGE TO LIGHTS WILL OCCUR, AND WARRANTY WILL BE VOID!
Fig 1a
Lighting Hook-Up From Rear
Ground
Illuminite Lighting
Input Terminals
Note: The BP104 Illuminite lights are not removable. There are no serviceable
parts inside or attached to the speaker assembly. The BP104 is a sensitive
electronic device. Removal of or tampering with any part of the speaker and/or its
assemblies will damage the product and void the warranty.
Illuminite™ Lighting Hook-Up
From Amplifier
12 volt DC source
Audio Input Terminals
BP1204 INSTALLATION
5