Advertisement
Note:
If the slide mechanism has already been installed, skip
this step.
Install
Coin Slide
1. Remove the access panel from the top of the meter case by
unlocking the service lock with the key taped to the front of
the coin box.
2. Deposit coins in the coin slide and push the coin slide all the
way in. Hold coin slide in extended position and insert through
opening in he front of the meter case.
3. From inside the meter case, place the threaded end of the
bolt through the center mounting hole in the front of the meter
case,
Instructions
for Changing
Vend Price
TOOLS NEEDED
Medium sized slotted screwdriver
* Small slotted Phillips screwdriver
Placeall screws and other items removed from coin slide assembly
on a cloth so they will not get lost.
STEP 1
Remove slide mechanism from meter case
(see FUGURE 1).
FIGURE 1
4. While
holding
the bolt in place, guide the coin slide
mechanism onto the threads and into the guide holes in the
front of the meter case.
5. Tighten the bolt as you guide the coin slide mechanism into
place.
6. Tighten the bolt using a ratchet and a 5/8-in. socket until the
slide mechanism is secure and does not move.
COIN BOX ADJUSTMENT
Tile tight fit of tile money box isset at tile factory. Customer may
loosen fit as desired by loosening the slotted nuts. See FIG.2.
FIGURE 2
Keep A record of all coin-box
key numbers,
A lost key can only be replaced by ordering the key numbers
from the place were the unit was purchased. The key number is
located both on the key and behind the end panel of the coin
box. If the key number is not available, the lock must be drilled
out to remove the coin box.
8
STEP2
Remove the coin slide extension from coin slide by removing
two mounting screws and spacers
(see FIGURE2).
(2) Mounting
Screws
and _
FIGURE 2
/
Slide Return
Spring
STEP3
Remove coin slide from coin chute:
,,Unhook and remove the coin slide return spring
(see FIGURE 2).
Turn coin slide mechanism
upside down.
Remove coin slide stop by taking out two screws to the chute
bottom (see FIGURE 3).
(2) Slide
Stop
Screws
FIGURE 3
Advertisement
