Specifications - BBE 382ISW SONIC MAXIMIZER User Manual And Reference Manual

SPECIFICATIONS

process mode
Frequency
Response
bypass mode
THD in process mode
Maximum Output
Input Impedance
Output Impedance
Sensitivity
Maximum Process
Lo Contour
Sub Out
Power Requirements
Dimensions
Shipping Weight
* 0dBu = 0.775mVrms
Note: Due to continuing product improvement, specifications and design are subject to change without notice.
50k Ohms, unbalanced 1/4" phone jack or RCA jack
1k Ohms, unbalanced 1/4" phone jack or RCA jack
0-6dB of gain,18dB/octave filter, selectable range from 30Hz to 120Hz,
1k Ohms, unbalanced 1/4" phone jack or RCA jack
U.S., Canada & Japan models: 120VAC, 50/60Hz, 8 WATTS
Standard model: 220VAC, 50/60Hz, 8 WATTS
Fuse Replace with 250VAC, 200mA fastblow type fuse
Program controlled
5Hz to 30kHz +/-0.5dBu, -10dBu input
less than 0.1% at -10dBu input, 20-20kHz
+20dBu
(may vary due to control settings)
-45dBu for maximum process
+12dBu boost at 5kHz, -10dBu input
+12dBu boost at 50Hz, -10dBu input
19"(W) x 5.5"(D) x 1.7"(H)
6.5 lbs.
7