button of the type of element which you
wish to add to the XPressList.
The dialog box Settings is opened.
2 In the input field Object register the path of
the desired element.
-OR-
Locate the element by clicking on the button
alongside the field Object.
3 If you select a program that is launched with
parameters, register the parameters in the
input field Command line parameters.
4 In the input field User information register
a name for the element in the XPressList.
The element will appear in the XPressList
under this name.
5 Click on the button OK.
The dialog box Settings is closed; the
dialog box Configure XPressList moves
into the foreground. The selected element
appears in the list.
6 In the input field User information register
a designation for the XPressList.
When you press the key to which the
XPressList has been assigned, this
designation appears at the lower right-hand
side of the screen as user information.
7 Click on the button OK.
The dialog box Configure XPressList is
closed; the dialog box Keyboard
Properties moves into the foreground.
8 Click on the button Adopt.
-OR-
Click on the button OK.
The XPressList is saved.
To deactivate an element in an XPressList
1 Click on the control box to the left of the list
18
element you wish to deactivate.
The tick of the selected element is deleted
from the control box.
2 Click on the button OK.
The dialog box Configure XPressList is
closed; the dialog box Keyboard
Properties moves into the foreground.
3 Click on the button Adopt.
-OR-
Click on the button OK.
The XPressList is saved.
To deactivate all elements in an XPressList
1 In the group All Elements click on the
button Deactivate.
The ticks of all elements are deleted from
the control boxes.
2 Click on the button OK.
The dialog box Configure XPressList is
closed; the dialog box Keyboard
Properties moves into the foreground.
3 Click on the button Adopt.
-OR-
Click on the button OK.
The XPressList is saved.
To activate an element in an XPressList
1 Click on the control box to the left of the list
element you wish to activate.
A tick appears in the control box of the
element.
2 Click on the button OK.
The dialog box Configure XPressList is
closed; the dialog box Keyboard
Properties moves into the foreground.
3 Click on the button Adopt.