Configuring The Launch Of A Predefined Program; Configuring The Opening Of A File / Document - Cherry CYBO@RD PLUS, M83-13800 User Manual

6.8.2 Configuring the launch of a
predefined program
You can link a special key with any particular
program. When you press the key, the
program is started.
To configure the launch of a program
1 In the group Keys of the Function Block
activate the option of the key to which you
wish to assign a new function.
2 In the group Functionality activate the
option Predefined program.
3 Click on the button Configure.
The dialog box Settings is opened.
4 In the input field Object register the path of
the program which you wish to assign to the
key.
-OR-
Locate the program by clicking on the
button alongside the input field Object.
5 If the program is launched with parameters,
register the corresponding parameters in
the input field Command line parameters.
6 In the input field User information register
a name for the new function of the key.
This name appears at the lower right-hand
side of the screen when you press the key.
7 Click on the button OK.
The dialog box Settings is closed and the
dialog box Keyboard Properties moves
into the foreground.
8 Click on the button Adopt.
-OR-
Click on the button OK.
The configuration of the key is saved.
6.8.3 Configuring the opening of a file
/ document
You can link a special key to a particular file.
When you press the key, the file is opened.
However, a program capable of opening the
file must be installed on your PC and this
program must be linked with the file type.
To configure the opening of a file
1 In the group Keys of the Function Block
activate the option of the key to which you
wish to assign a new function.
2 In the group Functionality activate the
option File/document.
3 Click on the button Configure.
The dialog box Settings is opened.
4 In the input field Object register the path of
the file which you wish to assign to the key.
-OR-
Locate the file by clicking on the button
alongside the input field Object.
5 In the input field User information register
a name for the new function of the key.
This name appears at the lower right-hand
side of the screen when you press the key.
6 Click on the button OK.
The dialog box Settings is closed; the
dialog box Keyboard Properties moves
into the foreground.
7 Click on the button Adopt.
-OR-
Click on the button OK.
The configuration of the key is saved.
15