Cherry CYBO@RD PLUS, M83-13800 User Manual page 13

To determine that the KeyMan symbol is
displayed in the task bar
1 In the group Task Bar activate the control
box Display symbol in the task bar.
2 Click on the button Adopt.
-OR-
Click on the button OK.
The setting is saved.
To determine that user information is
displayed when a special key is pressed
1 In the group User Information activate the
control box Display user information.
2 Set the Display duration in the spin box to
determine how long the user information is
displayed on screen after you have pressed
a key.
3 Click on the button Adopt.
-OR-
Click on the button OK.
The setting is saved.
To search local drives for e-mail programs
During this search process, KeyMan can
perform no other action. If you abort the
process, the dialog box Configure
XPressList is opened, in which all programs
found up to that point are listed.
1 In the group Applications click on the
button E-mail.
The dialog box Search Disk is opened. As
soon as the process has ended, the dialog
box Configure XPressListappears. If the
programs supported by KeyMan have been
found, they are displayed in the list.
12
2 Configure the programs found.
-OR-
Click on the button OK.
The dialog box Configure XPressList is
closed. The tab KeyMan appears in the
foreground.
-OR-
Should you not wish to save the results of
the search procedure, click on the button
Cancel.
The dialog box Configure XPressList is
closed. If an XPressList had already been
compiled prior to the search procedure, this
XPressList remains unchanged.
To search local drives for multimedia
programs
During this search process, KeyMan can
perform no other action. If you abort the
process, the dialog box Configure
XPressList is opened, in which all programs
found up to that point are listed.
1 In the group Applications click on the
button Multimedia.
The dialog box Search Disk is opened. As
soon as the process has ended, the dialog
box Configure XPressListappears. If the
multimedia programs supported by KeyMan
have been found, they are displayed in the
list.
2 Configure the programs found.
-OR-
Click on the button OK.
The dialog box Configure XPressList is
closed. The tab KeyMan appears in the
foreground.