Table of Contents
Advertisement
Redundancy—if you have more than one VCS, using a DNS that translates to the IP address of all VCS
will enable Movi to "fail over" to other VCS in case of a fault in one VCS.
Location awareness—for global companies it is possible to configure DNS servers so that Movi is
directed to a "local" VCS.
Flexibility—using DNS makes it possible to change the IP address of your VCS later on.
Movi also supports DNS SRV records, which allow even greater redundancy and flexibility because they
contain information such as "Priority" and "Weight".
Pre-configuring the Movi client
Both the Windows and
Windows version pre-settings
There are two ways to pre-set the Movi client for Windows:
1.
Installing Movi and setting the registry files (by for example running a batch file).
2.
Running the installation file with special arguments.
Setting the registry files
The registry files for Movi are located at:
HKEY_LOCAL_MACHINE\Software\TANDBERG\Movi\2.0 – default settings for all users
HKEY_CURRENT_USER\Software\TANDBERG\Movi\2.0 – settings for a specific user
Note: The paths for Movi 2.x are valid for later releases. This means that upgrading Movi does not require
setting the registry files again.
The following is an example of how to set the registry files:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\TANDBERG\Movi\2.0]
"InternalVcs"="internal.provserver.com"
"ExternalVcs"="external.provserver.com"
"Domain"="example.com"
Running the installation file with special arguments
The following special arguments are available:
Argument
DOMAIN
EXTERNALVCS
INTERNALVCS
HIDEADVANCEDLOGIN
ENCRYPTIONPOLICY
TANDBERG Movi Administrator guide
Mac version
of the Movi client can be installed with pre-configured settings.
Corresponds to SIP Domain in Movi's Advanced settings
Corresponds to External VCS in Movi's Advanced settings
Corresponds to Internal VCS in Movi's Advanced settings.
A value of 1 hides the Advanced settings link in the Movi client
sign-in screen. TANDBERG recommends using this setting so that
end users will not be able to make changes to the Advanced
settings
See the
Encryption
Description
section.
Deploying and upgrading Movi
Page 8 of 23
Advertisement
Table of Contents
