DREAM MULTIMEDIA DREAMBOX DM 800 HD PVR User Manual page 70

U s e r M a n u a l D r e a m b o x D M 8 0 0 H D P V R
These options are only available if the output type is set to "Scart":
Mode:
Scart
Select the standard supported by your TV screen. This is usually either PAL or
NTSC. If you own a TV screen which supports both modes you can also select
the Multi option. You TV screen will automatically switch depending on the
input signal. These options are only available ifthe output type is set to "Scart".
Aspect ratio:
Automatic (Standard)
4:3 shows will be shown as 4:3 and 16:9 shows will be shown as 16:9.
4:3
Display 16:9 content as:
Letterbox
16:9 programs will be displayed on 4:3 TV's with black beams at top and bottom.
Pan&Scan
16:9 programs will be zoomed to full hight on 4:3 TV's, parts of the picture on the left and right side will
cut off.
Just Scale
4:3 shows will be shown in full height on a 16:9 screen and are stretched to fit the width of your
screen.
16:9 und 16:10:
Display 4:3 content as:
Please see previous page.
Color format:
- CVBS (FBAS),
- RGB (Red, Green, Blue separated),
- SVideo (Color- and Brightness signal separated)
WSS on 4:3:
Check the checkbox to disable zooming on some 16:9 TV's during 4:3 transmissions.
Press the green Options-Button to save the setting or the red Options-Button to discard them.
You are taken back to the "System" menu.
Note
Please keep in mind the possible settings of your TV. Some 16:9 TVs
automatically zoom on 4:3 content to give you a full screen picture. Refer to
your TV's instruction manual for reference.
- 70 -