Wireless Network; Configure The Wireless Settings - Brother HL 5370DW - B/W Laser Printer Quick Setup Manual

Wireless Network

Configuration in Infrastructure mode, using
application
8

Configure the wireless settings

You must know your wireless network settings before you proceed with this installation.
Make sure you take notes on all the current settings such as SSID, authentication and encryption of your wireless
network environment. If you do not know them, contact your network administrator or the manufacture of your
access point/router.
Item
Communication mode: (Infrastructure)
Network name: (SSID, ESSID)
Authentication method:
(Open System, Shared key, WPA-PSK
1
WPA2-PSK , LEAP, EAP-FAST)
Encryption mode:
(None, WEP,TKIP, AES, CKIP)
Network key:
(Encryption key, WEP key
1
WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using
TKIP or AES encryption (WPA-Personal). WPA/WPA2-PSK (TKIP or AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in
length, up to a maximum of 63 characters.
2
The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know
this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value
that must be entered in an ASCII or HEXADECIMAL format.
For example:
64-bit ASCII:
64-bit Hexadecimal:
128-bit ASCII:
128-bit Hexadecimal:
IMPORTANT
You need to temporarily use an Ethernet cable during configuration (cable not included).
a
Make sure the printer power switch is on.
b
Turn on your computer. (You must be logged
on with Administrator rights.)
24
Example
Infrastructure
HELLO
WPA2-PSK
1
,
AES
12345678
2
, Passphrase)
Uses 5 text characters e.g. "Hello" (this is case sensitive)
Uses 10 digits of hexadecimal data e.g. "71f2234aba"
Uses 13 text characters e.g.
"Wirelesscomms" (this is case sensitive)
Uses 26 digits of hexadecimal data e.g.
"71f2234ab56cd709e5412aa3ba"
the Brother installer
Record the current wireless network settings
c
Put the supplied CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically.
Choose your printer model and the language.
®
Windows