Halftone; Verification Stamp - Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual

Basic Transmission Settings
04002000002

Halftone

The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
04002020003
preset to HALFTONE = Off. You can select either Fast mode or Quality mode.
Press HALFTONE
04002050003

Verification Stamp

The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
04002020004
successfully transmitted page with a small mark.
Press STAMP to:
04002050004
Note:
04002070007
04002070005
68
to:
FAST
QUALITY
HALFTONE
HALFTONE = Off
STAMP = Off
1. When you store a document in memory, the Verification Stamp will stamp on the document if it is
successfully stored in memory. In this case the Verification Stamp is not a confirmation that the
document was successfully transmitted. If you wish to disable the use of the Verification Stamp
when storing document in memory, change the setting of Fax Parameter No. 28, see page 61.
2. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04, see
page 60.
FAST
QUALITY
HALFTONE
HALFTONE = Quality
STAMP STAMP
STAMP = On
FAST
QUALITY
HALFTONE
HALFTONE = Fast