Diameter Dimensions - Autodesk AUTOSKETCH 8 User Manual

2 Click the handle and drag it to the new location. The dimension label
moves to the new location and the dimension is aligned to match.
To move the label of a circumscribed radius dimension
1 Double-click the dimension or right-click it and click Edit Vertices on the
pop-up menu.
2 Click the vertex on top of the dimension label and drag it along the
dimension line.

Diameter Dimensions

A diameter dimension notes the diameter of an arc (including a bulged
segment of a polygon or polyline) or circle. You can place the label for a
diameter dimension inside or outside of the referenced arc or circle. Clicking
just inside the arc or circle places it inside. Clicking just outside the arc or
circle places it outside. AutoSketch automatically calculates the value
displayed in the dimension label based on settings in the Dimension Format
dialog box. For information on formatting a diameter dimension, see online
Help.
To dimension the diameter of an arc or circle
1 On the Draw menu, click Dimension, Diameter, or click Diameter
Dimension on the All-In-One toolbar.
2 Click anywhere along the arc or circle. Clicking just inside the arc or circle
places the dimension inside. Clicking just outside the arc or circle places
it outside.
|
236
Chapter 18 Creating Dimensions