Licensing Issues; What Is The Difference Between A Stand-Alone License And A Network License - Autodesk AUTOCAD 2010 - STAND-ALONE Manual

Files are also installed to the \<AutoCAD>\Help folder.

Licensing Issues

This section outlines common issues and their solutions with regards to
software licenses and licensing your product(s).
What is the difference between a stand-alone license
and a network license?
Stand-alone licensed products are registered and activated to an individual
workstation. While the software can be installed on multiple systems in your
facility, the license only allows one system to be operational. If you need to
run more systems, you need to purchase more stand-alone licensed products,
or consider converting to network licenses.
Network licensed products rely on the Network License Manager to keep track
of software licenses. The software can be installed and run on multiple systems,
up to the maximum number of licenses you ve purchased. The Network License
Manager "checks out" licenses until they are all in use. No further systems
can run the program until a license is "checked in." If you need to run more
systems, you can purchase additional licenses for the Network License Manager
to maintain.
Stand-alone licensed products are registered and activated to an individual
workstation. While the software can be installed on multiple systems in your
facility, the license only allows one system to be operational. If you need to
run more systems, you need to purchase more stand-alone licensed products,
or consider converting to multi-seat stand-alone licenses.
You cannot purchase a network licensed version of PRODNAME. However, a
multi-seat stand-alone licensed version is available that does not rely upon
servers to maintain licenses. Multi-seat stand-alone licensing means that each
installation of your product uses a single serial number for registration and
activation.
48 | Chapter 3 Installation Troubleshooting