Uninstall Autocad; Installing Design Review - Autodesk AUTOCAD 2010 - STAND-ALONE Manual

Uninstall AutoCAD

When you uninstall AutoCAD, all components are removed. This means that
even if you've previously added or removed components, or if you've reinstalled
or repaired AutoCAD, the uninstall removes all AutoCAD installation files
from your system.
To uninstall AutoCAD
1 Do one of the following:
(Windows XP) Click Start menu
Add or Remove Programs.
(Windows Vista) Click Start menu
and Features
2 Then, do one of the following:
(Windows XP) In the Add or Remove Programs window, select
AutoCAD, then click Change/Remove.
(Windows Vista) In the Uninstall or Change a Program window, select
AutoCAD, then click Uninstall/Change.
The AutoCAD Installation wizard re-opens in Maintenance mode.
3 Click Uninstall.
4 On the Uninstall <AutoCAD> page, click Next to remove AutoCAD from
the system.
5 When informed that the product has been successfully uninstalled, click
Finish.
NOTE Even though AutoCAD is removed from your system, the software license
remains. If you reinstall AutoCAD at some future time, you will not have to register
and re-activate the program.

Installing Design Review

Autodesk Design Review 2010 is not installed by default when you install
AutoCAD. It is recommended that Design Review be installed if you need to
view DWF or DWFx files.
22 | Chapter 1 Quick Start to Stand-Alone Installation
Settings
Control Panel
Uninstall or Change a Program.
Control Panel
Programs