Configure Button - Autodesk AUTOCAD 2010 - STAND-ALONE Manual

Configure Button

During the installation process, you choose either a typical installation (install
the product with default settings), or a customized installation. If you choose
to customize, you start that process in the Review - Configure - Install dialog
box. Select the appropriate product from the drop-down list, and click the
Configure button.
After you click the Configure button, the following dialog boxes and options
are displayed:
Select the License Type - Stand-Alone license or Network license. If you choose
Network license, you also need to select the license server model - Single,
Distributed, or Redundant.
Select the Installation Type - Typical or Custom. If you choose a Typical
installation (default settings), the product installs the most common
application features. To see which features are included in a Typical
installation, refer to
installed?
install.
Include a Service Pack - If a service pack is available for your installation,
you can include it.
When you have completed your choices, click the Configuration Complete
button. This takes you back to the Review - Configure - Create dialog box,
where you can review your selections and complete the installation process.
NOTE To get a copy of your settings, select the Copy to Clipboard button.
If you do not wish to make configuration changes on the Review - Configure
- Install page, click Install. Then click Yes, to continue installing using the
typical configuration.
8 | Chapter 1 Quick Start to Stand-Alone Installation
When performing a Typical installation, what gets
on page 46 If you choose Custom, you select specific features to