Draytek VigorPro 5500 Series User Manual page 69

Call Filter
Data Filter
Filter
Content Security
Management
Anti-Virus
Anti-Intrusion
Anti-Spam
Log
VigorPro5500 Series User's Guide
Check Enable to activate the Call Filter function. Assign a start
filter set for the Call Filter.
Check Enable to activate the Data Filter function. Assign a start
filter set for the Data Filter.
Select Pass or Block for the packets that do not match with the
filter rules.
Select a CSM profile for global IM/P2P application blocking. All
the hosts in LAN must follow the standard configured in the
CSM profile selected here. For detailed information, refer to the
section of CSM profile setup.
Select one of the anti-virus profile settings (created in
Anti-Virus>>Profile Setting) for applying with this router. Please
set at least one profile for anti-virus in Anti-Virus-> Profile
Setting web page first.
Check the Enable box to invoke anti-intrusion filter function.
Select one of the anti-spam profile settings (created in
Anti-Spam>>Profile Setting) for applying with this router. Please
set at least one profile for anti-spam in Anti-Spam>>Profile
Setting web page first.
For troubleshooting needs you can specify the
filter/CSM/Anti-Virus/Anti-Intrusion/Anti-Spam log here by
checking the box. Check this box to record all packets; or uncheck
this box to ignore all the packet record. The log will be displayed
on Draytek Syslog window.
61