Interface
RST
(Factory Reset)
ISDN
WAN(1/2)
LAN/Monitor
LAN (1- 4)
6
Description
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
Connect for NT1 (or NT1+) box provided by ISDN service provider.
Connecter for remote networked devices.
Connecter for local networked devices.
Connecter for local networked devices.
Connecter for a power cord with 100-240VAC (inlet).
Power Switch. "1" is ON; "0" is OFF.
VigorPro5500 Series User's Guide