Draytek 2800 Series User Manual page 63

To activate the function of limit session, simply click Enable and set the default session
limit.
Enable
Disable
Default session limit
Limitation List
Start IP
End IP
Session Number
Add
Edit
Remove
Index (1-15) in Schedule
Setup
Vigor2800 Series User's Guide
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
Define the default session number used for each computer in
LAN.
Display a list of specific limitations that you set on this web
page.
Define the start IP address for limit session.
Define the end IP address for limit session.
Define the available session number for specific range of IP
addresses. If you do not set the session number in this field,
the system will use the default session limit for the specific
limitation you set for each index.
Add the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
You can type in four sets of time schedule for your request.
All the schedules can be set previously in Application –
Schedule web page and you can use the number that you have
set in that web page.
59