Advertisement
4.0
SYSTEM SET-UP AND OPERATION
A)
Manual Activation
1) Insert the ACR/L-32 or ACR/L-32 RCL Light into a BA-4386 or BA-5598
Battery.
2) Press the Push-ON, Push-OFF switch for the desired position (light will turn
ON or OFF accordingly).
3) Repeat steps 1 and 2 for all additional lights.
(Each light must have its own battery.)
B)
Remote Control Activation of the ACR/L-32, ACR/L-32RC Combination (See Figure
5)
1) Set the ACR/L-32 to ON position (see steps 1 and 2 of Manual Activation).
2) Insert the ACR/L-32RC Remote Control in between the light and the battery.
3) Install the antenna into its base.
4) Secure the complete assembly of the light, the remote control and the battery together
with the canvas strap, and secure it to the ground with long nails or stake-down pins.
5) At a remote location (up to 5,000 feet away from lights), set the frequency to 46.75
MHz on the PRC-77 or equivalent.
Figure 3
ACR / L-32 RCL
Remote Controlled Light
5
Y1-03-0116 Rev. C
Advertisement
