Advertisement
6
5
4
ON or Activation
Codes
This depicts a code 1
will turn the light "ON"
Figure 7:
6.0
CODE CONFIGURATION SET-UP
A)
To access the DIP switch
1.
2.
B)
Pick code number(s) (1 through 6) which will turn the unit "ON". Code numbers
not used for "ON" may be picked to turn the unit "OFF".
RULES:
There are a total of 6 combined ON-OFF code options.
Each selected code number may be used for one function only, "ON" or "OFF".
C)
Setting the "ON" code selector -
Set the DIP switches of the "ON" code selector to the "ON" position for desired
"ON" activation code. Set all other DIP switches to "OFF" position.
Wall of case
3
2
1
ON
SETTING THE ON AND OFF REMOTE CODES
Remove rear cover of the ACR/L-32RC unit by removing 4 phillips-
head screws.
Unscrew the lens assembly on the ACR/L-32RCL
6
5
4
OFF or Deactivation
Codes
This depicts a code 3
will turn the light "OFF"
9
3
2
1
ON
Y1-03-0116 Rev. C
Advertisement
