Adding Water And Coffee; Filling The Water Tank; Filling The Coffee Bean Container; Operation And Use - CDA CVC3 Manual

Table of Contents

Advertisement

5 ADDING WATER AND COFFEE BEANS IN THE RESPECTIVE CONTAINERS
5 ADDING WATER AND COFFEE BEANS IN THE RESPECTIVE CONTAINERS

FILLING THE WATER TANK

The water tank needs to be refi lled when the display shows:
COFFEE
WATER
To ensure the best result in making espresso, in addition to using
good quality coffee, it is also essential to use good water. We the-
refore recommend emptying the water tank frequently and refi lling
it with fresh water. Avoid leaving the water in the tank for excessi-
vely long periods.
IMPORTANT: Use only cold potable water with hardness less than
7°F.
• Open the machine by raising the drawer handle and pulling ou-
tward.
• Fill the tank up to 4 cm (1 9/16 inches from the top).
• Close the machine.
N.B. When the water tank is almost empty, the message " WATER
LOW " will appear on the display panel
Note: The tank can be removed for cleaning.

6 OPERATION AND USE

6 OPERATION AND USE

SWITCH-ON

Switch the machine on using the key
After a few seconds, the following message appears on the display
panel:
Welcome message
COFFEE
WATER
During the heating phase, the words COFFEE and WATER fl ash.
The machine is ready for use only when they have stopped
fl ashing.
The display also shows the type of coffee selected (short/medium/
long) as well as the choice of making one or two coffees at the
same time.

PROGRAMMING THE MACHINE

Various functions can be adjusted and programmed, as indicated
below:
I C T- 0 3
I C T- 0 3
LOW
HELLO
1 SHORT

FILLING THE COFFEE BEAN CONTAINER

The coffee bean container needs to be refi lled when the display shows:
COFFEE
WATER
Fill the coffee bean container using only beans for espresso cof-
fee.
Any other substance, including ground coffee, can damage the
coffee grinder.
Do not use beans treated with caramel, sugar, or similar substan-
ces, instant coffee, or any beverage containing sugar. Sugar can
damage the machine.
• Open the machine by raising the drawer handle and pulling ou-
tward.
• Remove the lid of the coffee bean container.
• Fill the container with beans up to 2 cm (3/4 inches) from the
top.
• Put the lid back on the container.
• Close the machine.
To enter programming mode, with the machine off press the key
for 3 seconds until the display panel shows:
PROGRAMMING
Use the keys
grammed, which are, in order of appearance:
Pressing the key
Use the keys
to set the hour. Initially the two digits re-
lated to the hour fl ash.
After setting the hour, press the key
The two digits related to the minutes fl ash. Set the minutes by
E n g l i s h
E n g l i s h
LOW
to select the functions to be pro-
CLOCK
the display panel shows:
20:30
1 1
1 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents