Introduction to Installing ESX
These topics discuss the prerequisites and options for installing ESX.
The ESX installation includes the following components:
ESX
n
vSphere Web Access
n
This chapter includes the following topics:
"Prerequisites for Installing ESX,"
n
"About the esxconsole.vmdk,"
n
"Options for Accessing the Installation Media, Booting the Installer, and Running the Installer,"
n
page 22
"About ESX Evaluation Mode,"
n
"ESX Installation Options,"
n
Prerequisites for Installing ESX
Before you begin the installation procedure, ensure that the host meets the prerequisites.
The prerequisites are as follows:
Make sure the host has a supported network adapter.
n
If your installation will require a network connection or if you want to test out the network settings, verify
n
that the network cable is plugged into the Ethernet adapter that you are using for the service console. The
ESX installer needs a live network connection to properly detect certain network settings, such as the host
name under DHCP. IPv6 is not supported for ESX installation. Installation options that require a network
connection include PXE booting the installer, accessing a remote ESX installation script, and accessing
remote installation media.
VMware, Inc.
on page 21
on page 22
on page 23
on page 23
3
on
21