Joining To A Linked Mode Group During And After Installation; Join A Linked Mode Group After Installation - VMware ESX 4.0 - INSTALLATION GUIDE UPDATE 1 Installation Manual

3 From the vSphere Client, connect directly to the vCenter Server instance on which you have changed the
domain or machine name.
4 Select Administration > vCenter Server Settings and click Advanced Settings.
5 For the Virtualcenter.VimApiUrl key, change the value to point to the location where the vSphere Client
and SDK clients can access the vCenter Server system.
For example:
6 For the Virtualcenter.VimWebServicesUrl key, change the value to point to the location where
vCenter Server Webservices is installed.
For example:
7 For the Virtualcenter.Instancename key, change the value so that the modified name appears in the
vCenter Server inventory view.
8 Rejoin the vCenter Server system to the Linked Mode group.
See

"Join a Linked Mode Group After Installation,"

Joining to a Linked Mode Group During and After Installation

You can join a system to a Linked Mode group during or after installing vCenter Server.
For example, suppose you have three machines on which you want to install vCenter Server. You want the
three instances to be members of a Linked Mode group.
1 On Machine 1, you install vCenter Server as a standalone instance because you do not yet have a remote
vCenter Server machine to join.
2 On Machine 2, you install vCenter Server, choose to join a Linked Mode group, and provide the fully
qualified domain name of Machine 1.
3 On Machine 3, you upgrade to vCenter Server 4.0. After the upgrade, you configure Machine 3 to join
either Machine 1 or Machine 2. Machine 1, Machine 2, and Machine 3 are now members of a Linked
Mode group.
Join a Linked Mode Group After Installation
If you have a system that is already running vCenter Server 4.0, you can join the machine to a Linked Mode
group.
Prerequisites
See "Linked Mode Prerequisites,"
Procedure
1 Select Start > All Programs > VMware > vCenter Server Linked Mode Configuration.
2 Click Next.
3 Select Modify linked mode configuration and click Next.
4 Click Join this vCenter Server instance to an existing linked mode group or another instance and click
Next.
5 Enter the server name and LDAP port number of a remote vCenter Server instance that is a member of
the group and click Next.
If you enter an IP address for the remote server, the installer converts it into a fully qualified domain name.
VMware, Inc.
http(s)://<machine-name/ip>:<vc-port>/sdk
https://<machine-name/ip>:<webservices-port>/vws
on page 109 and
Chapter 14 Creating vCenter Server Linked Mode Groups
.
.
on page 111.
"Linked Mode Considerations," on page 110.
111