Turning The Sat Nav Unit On/Off; Turning The Sat Nav Unit Off (Sleep Mode); System Reset - Binatone G500 User Manual

Turning the Sat Nav Unit On/Off

Press the On/Off button on the top of the unit briefly, the unit will power up and
display the warning screen.
Press and hold the On/Off button for a
few seconds during operation, the unit
will show up the following display,
Turning the Sat Nav Unit Off or
Sleep Mode
Press the sleep icon
the unit into sleep mode. Press and
hold the On/Off button again, to bring
the unit out of sleep mode. When
brought out of sleep mode the unit will
show the same screen as when the
unit entered sleep mode.
Press the Off icon
There is a 10 second timer which starts to count down, if there is no selection made
within 10 seconds, the unit will turn off automatically.
Note: If the unit is not to be used for a long period of time it is advised that you switch
the unit Off.
The unit will automatically switch On when power is applied to the unit. When
connected to power the unit will always switch to sleep mode regardless, until power
is removed from the unit.

System Reset

Under extreme circumstances it may be necessary to reboot the system. Reset the
system if the following situation occurs:
• Long delay experienced with screen refresh rate or operation, resulting in an
inoperable unit.
• The system will not turn Off with the power button.
• No response with selection made on the screen.
The reset button can be found on the back of the unit. Insert the tip of the stylus pen
into the reset switch in order to press. The system will be immediately reset.
7
to put
to turn the unit Off.
Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate)
QUICK START GUIDE