Table of Contents
Advertisement
NAVIGATION
8.1 Language
Tap to open the language selection screen. You
can choose from 10 different languages. When a
language is selected not only will it affect the text
on the screen, but will also change the language
of the spoken voice directions.
Tap
or
to scroll back and forth
between each page.
Select the required language so that it is
highlighted orange and tap
to confirm.
The unit will return to the settings screen.
8.2 Safety Alert
Tap to open the safety alert options screen. From this screen you can set two separate
safety alerts.
Speed camera on – This lets you activate or
deactivate the speed camera warning, when
activated the unit will warn you of an approaching
speed camera visually and show you the distance to
the camera.
When the option is shown with an orange indicator it
is activated.
Speed alert when exceeding the road speed limit –
This lets you activate or deactivate the road speed limit warning. As well as speed camera
locations, the unit contains information about the speed limit of many roads. When
activated the unit will show you the speed limit for the road you are on with a fixed speed
limit icon, if you exceed the speed limit (including any tolerance you have set) for the road
you are on the speed limit icon will flash and the unit will beep.
When the option is shown with an orange indicator it is activated.
When active you can then change the speeding tolerance using the
and
keys to
select the tolerance you would like from 0%, 5%, 10%, 15% and 20%. The unit will then
only warn you when you exceed the speed limit by more than this percentage.
Set the required options and tap
to confirm
the unit will then return to the settings screen.
8.3 Trace Record
The unit is capable of logging all positioning
information received from the GPS satellites during
navigation. It then uses this information to draw a
track of the route on the map. This enables you to
review the route at a later time.
If you have previously recorded any trace records these will be shown in the list. If there
are no trace records you will have to record one first.
Recording a trace record: Use the
button to start the recording process. When
active this button will then change to show
. In this way the key will always show
Advertisement
Table of Contents
