Engine Oil Inspection And Change - Sym QUADLANDER 250 Manual

7. INSPECTION AND MAINTENANCE BEFORE RIDING

Engine oil inspection and change

(1) Engine oil
INSPECTION
1. Uses main parking places standpoint ATV in the level ground, will remove the oil gauge
later to stop in the engine the 3~5 minute. Wipes the oil mass oil to count with then inserts
it to enter the drive pipe again (Do not rotate it.)
2.Remove the dipstick and check whether oil level is in between the upper and lower marks.
OIL CHANGE:
Change engine oil after the first 300km or first month, and change the engine oil every
1000km or 3 months thereafter. Clean oil filter after the first 300km or first month, and
clean oil filter every 1,000km or 3 months.
In order to maintain the engine's maximum performance, check whether the engine oil
is enough every month. Add oil to upper limit if the engine oil has been found to be
inadequate.
Engine Oil : Use API SH, SAE 10w-30 grade or better engine oil. Otherwise, damage
will not be covered by warranty.
(1)
41
Upper limit
Lower limit