Intel I965P User Manual page 18

Introduction
This mainboard is equipped with a digital thermometer capability to monitor any temperature. This is useful for
measuring heat on peripherals such as VGA cards, hard disk drives, DIMMs or even on-board components such as
chipset, MOSFETS, etc.
Thermo Stick consists of:
1) THM_ST header located on the mainboard.
2) Thermostick sensor cable with heat-tolerant adhesive sticker bundled in the
mainboard package.
3) Thunder Probe software utility.
To setup Thermo Stick,
1. Insert the sensor cable to THM_ST header on the mainboard.
2. Using the adhesive sticker, affix the sensor head of the cable to your desired point of measure. e.g. the
chipset as in the picture below. Trim the adhesive sticker to a suitable size so that it will not affect the heat
dissipation of any heatsink.
3. Ensure the cable is neatly tucked away from fans or other moving parts.
4. Install and run the Thunder Probe software. The temperature will be shown as below.
14
Section 4 -- Thermo Stick (Optional)
THM-ST