How To Use Your Isis Iq Uno - Philips AVENT ISIS IQ UNO Instruction Booklet

How to use your ISIS iQ UNO

Before you use your ISIS iQ UNO, make sure you have washed, sterilised
and carefully assembled your pump exactly as described on pages 5-8.
Wash your hands thoroughly and make sure your breasts are clean.
Relax in a comfortable chair, leaning slightly forward (use cushions
to support your back). Make sure you have a glass of water nearby as
expressing can be thirsty work. A photograph of your baby will help too.
To begin pumping
Switch on at the wall socket if using mains
power. To turn the pump on, press and
hold the control button for 2 seconds.
The light on the top of the control handle
will flash ORANGE and then turn to a
solid GREEN to indicate that the pump
is ready to use. If at any time the light
is flashing red, stop and consult the
'Troubleshooting guide' on pages 19-20.
Press the assembled pump firmly against
your breast to create a seal.
Using the control handle you can find
your exact comfort level. As you press
down on the handle you will feel greater
suction against your breast. You don't
need to squeeze the handle fully, only
as far as feels comfortable for you.
9
™
1
2
Begin by gently squeezing the handle
5 or 6 times quite quickly, simulating
the rapid suckling you usually feel
when your baby is first put to the
breast. Your milk will soon begin to
flow and you can establish a slower,
comfortable pumping pattern.
Many mothers find that holding down
the handle for 2 to 3 seconds at a
time imitates the feeling of their
baby breastfeeding.
When you have established a
comfortable pumping rhythm with
at least 2 squeezes, simply press the
control button on the handle, and
the ISIS iQ UNO™ will automatically
continue in the same way.
The light on the control handle will turn
from solid GREEN to a flashing GREEN.
Your pattern will now be stored in the
pump's memory – even after the pump
has been switched off!
3
4
10